Workplace chemical labeling is one of those areas of Hazard Communication that can seem straightforward until a contractor starts moving chemicals out of their original containers.
A chemical arrives on the jobsite with a complete manufacturer’s label. Then someone pours some of it into a smaller container, places it in a spray bottle, or transfers it into another vessel for use during the day’s work.
Suddenly, the question becomes:
“What exactly needs to be on this new container?”
The answer isn’t necessarily “copy the entire manufacturer’s label.”
OSHA’s Hazard Communication Standard provides employers with specific flexibility for workplace containers, but that flexibility has to work within a broader system of written procedures, Safety Data Sheets, and employee training.
Workplace Chemical Labeling Is Different From Shipped Containers
Chemical manufacturers, importers, and distributors have specific requirements for containers of hazardous chemicals that are shipped to other workplaces.
Those labels generally contain six required elements:
- Product identifier
- Signal word
- Hazard statement(s)
- Pictogram(s)
- Precautionary statement(s)
- Manufacturer, importer, or responsible party information
Workplace containers are treated differently.
Under 29 CFR 1910.1200(f)(6), employers may generally use the full shipped-container label or an alternative workplace labeling system that includes the product identifier along with words, pictures, symbols, or a combination of those that provide at least general information regarding the hazards.
The employer’s Hazard Communication Program and other immediately available information must provide employees with the specific information necessary to understand the hazards.
That distinction is particularly important for contractors.
Secondary Containers Are Where Things Get Complicated
Consider a construction company using a chemical from a five-gallon container.
A worker transfers some of the chemical into a smaller container because carrying the original container around the jobsite isn’t practical.
The worker now has a secondary container.
The employer needs to consider how that container will be identified and how the worker will obtain the associated hazard information.
The solution could involve the original GHS labeling information, a workplace labeling system, or another approach permitted under the standard.
What matters is that the system is established and understood.
A workplace container shouldn’t become an unidentified bottle sitting on a jobsite with no indication of what is inside.
The Employer’s Written HazCom Program Matters
Workplace labeling doesn’t exist in isolation.
OSHA requires employers to develop and maintain a written Hazard Communication Program describing how they will meet the requirements of the standard.
The program must address things such as:
- Labels and other warnings
- Safety Data Sheets
- Employee information and training
- The methods used to inform employees about hazardous chemicals in their work areas
This becomes particularly important when an employer uses an alternative workplace labeling system.
Employees need to understand what the symbols, colors, numbers, words, or other information mean.
A labeling system isn’t particularly useful if the worker looks at it and has no idea how to interpret it.
HMIS, NFPA, and Other Alternative Systems
OSHA has recognized alternative workplace labeling systems for decades.
In a 1993 Letter of Interpretation, OSHA stated that employers may use alternative labeling methods when their written Hazard Communication Program adequately addresses the system.
OSHA gave examples including:
- HMIS — Hazard Material Information System
- NFPA — National Fire Protection Association
- ANSI — American National Standards Institute
These systems can provide useful ways of communicating hazard information in a workplace.
However, simply putting an NFPA diamond or HMIS rating on a container doesn’t automatically create a complete Hazard Communication program.
Employees still need to understand what the system means, and the employer needs to provide access to the more detailed hazard information required by the standard.
The SDS Is Still Important
One of the biggest mistakes is treating the workplace label as if it has to provide everything an employee could possibly need to know about a chemical.
That’s not the purpose of the label.
A label provides immediate identification and hazard information.
The Safety Data Sheet provides much more detailed information.
Depending on the chemical, the SDS can provide information regarding:
- Hazard identification
- First-aid measures
- Firefighting measures
- Accidental release measures
- Handling and storage
- Exposure controls and PPE
- Physical and chemical properties
- Toxicological information
- Disposal considerations
- Transportation information
Employees need to know how to access the SDSs relevant to the chemicals they may encounter.
For a construction company, that might mean having SDS information accessible electronically, in a physical binder, or through another system that meets the applicable requirements.
The important thing is that employees can actually obtain the information when they need it.
The Immediate-Use Exception
There is also an important exception for certain portable containers.
Under 29 CFR 1910.1200(f)(8), an employer does not have to label a portable container when hazardous chemicals are transferred from a labeled container and the portable container is intended only for the immediate use of the employee who performs the transfer.
This is useful in situations where a worker transfers a small quantity of a chemical into a container for immediate use.
But the phrase “immediate use” matters.
The exception shouldn’t be interpreted as permission to transfer chemicals into unlabeled containers and leave them sitting around for later use.
If the container is going to remain in the workplace or be used by another employee, the employer needs to evaluate the applicable workplace-labeling requirements.
What About Multi-Employer Construction Sites?
Construction sites add another layer of complexity because multiple employers may be working in the same area.
- A general contractor may have its own chemicals.
- A mechanical contractor may bring solvents and adhesives.
- An electrical contractor may have cleaning products or other chemicals.
- A painting contractor may introduce coatings, thinners, and other products.
- A flooring contractor may use adhesives and chemical treatments.
- Workers from one company can potentially encounter chemicals brought onto the project by another company.
OSHA’s Hazard Communication Standard addresses this situation.
Employers at multi-employer workplaces have responsibilities concerning how other employers’ employees can obtain information about hazardous chemicals, necessary precautionary measures, and workplace labeling systems. (osha.gov)
This is one reason a general contractor’s project-specific safety requirements and coordination efforts can be important.
A contractor should know what hazardous chemicals are being brought onto the project and how affected workers can obtain the information they need.
Don’t Assume Your Subcontractor Has It Organized
This is particularly relevant for general contractors.
It can be tempting to assume that every subcontractor arriving on the project has a complete Hazard Communication Program, current SDSs, properly labeled secondary containers, and trained employees.
Some will.
Some may not.
A general contractor doesn’t necessarily need to manage another employer’s entire Hazard Communication Program, but it is reasonable to establish project expectations and verify that subcontractors are meeting applicable requirements.
Depending on the project, that might include requiring subcontractors to:
- Submit SDSs for hazardous chemicals they bring onto the site.
- Properly identify secondary containers.
- Maintain required employee training.
- Follow project chemical-storage requirements.
- Coordinate chemical hazards with other contractors.
- Communicate relevant hazards to affected workers.
Trust, but verify.
On a complicated construction project, assuming that every contractor has everything organized can create unnecessary risk.
Labeling Is About Communication
The most useful way to think about workplace labeling is not as a paperwork exercise.
Think about what happens when a worker encounters an unfamiliar container.
They need to know:
What is this?
What hazards does it present?
How do I protect myself?
Where can I find more information?
A good workplace labeling system helps answer those questions quickly.
A poor one leaves the worker guessing.
That’s especially concerning when the chemical presents hazards that aren’t obvious from its appearance.
A clear container might contain a hazardous solvent.
A small bottle might contain a corrosive chemical.
A familiar-looking liquid might be highly flammable.
Workers shouldn’t have to rely on smell, appearance, or memory to determine what they’re handling.
Keep the System Simple Enough to Actually Work
Another consideration for contractors is practicality.
A workplace labeling system can be technically sophisticated, but if workers don’t understand it or supervisors don’t consistently use it, the system isn’t doing much good.
The best system is one that workers can actually use.
If your company uses NFPA labels, train employees on NFPA labeling.
But, if you use HMIS, train employees on HMIS.
And if you use the manufacturer’s labels, make sure employees know how to interpret the information and where to find the SDS.
Whatever system you use, make sure it is incorporated into the written Hazard Communication Program and consistently applied.
A Good HazCom Program Connects the Pieces
Effective Hazard Communication isn’t about having a perfect label sitting on every container.
It is about creating a system in which the pieces work together.
The label identifies the chemical and provides hazard information.
The SDS provides detailed information.
The written HazCom Program establishes how the system works.
Training teaches employees how to use the information.
When those pieces work together, workers have a much better chance of recognizing chemical hazards and making appropriate decisions.
The Bottom Line
Workplace chemical labeling gives contractors some flexibility, but flexibility doesn’t mean a lack of responsibility.
Employers need to establish a system that allows employees to identify hazardous chemicals and understand the hazards associated with them.
Secondary containers should not become mystery containers.
SDSs should not be buried somewhere that nobody knows how to access.
Alternative labeling systems shouldn’t be implemented without training employees on how to interpret them.
And on multi-employer construction sites, contractors should communicate relevant chemical hazards rather than assuming everyone already knows what is present.
The goal is ultimately pretty simple:
A worker should never have to guess what is inside a chemical container or what danger it presents.
Good Hazard Communication makes sure the information is there before the worker needs it.
References
- OSHA — 29 CFR 1910.1200, Hazard Communication
- OSHA — June 14, 1993 Letter of Interpretation: Hazard Communication labeling requirements
This article provides general information about OSHA’s Hazard Communication Standard and is not a determination of compliance for any particular workplace. Specific requirements can depend on the chemical, container, work activity, and circumstances.


