You are currently viewing Safely Storing Chemicals Near Waterways

Safely Storing Chemicals Near Waterways

Storing fuel, oil, or other hazardous chemicals near navigable waterways isn’t just a matter of convenience or available space, it’s a high-stakes responsibility. Whether your facility is adjacent to a river, stream, lake, or drainage channel, improper storage of hazardous materials can lead to serious consequences for both the environment and your business.

Why It Matters

Even a minor spill near water can quickly escalate into a major environmental incident. Contaminants can enter storm drains, groundwater systems, or flow directly into open waterways. This results in:

  • Ecosystem damage
  • Drinking water contamination
  • Costly cleanups
  • Regulatory fines from the EPA and EGLE
  • Reputation damage for your company or facility

Common Risks at Industrial and Commercial Sites

Fueling canisters, oil drums, or bulk chemical tanks are often staged or stored close to maintenance areas or equipment bays, many of which are situated dangerously close to stormwater inlets or natural waterways.

Here’s where many facilities go wrong:

  • No secondary containment for drums or tanks
  • Unlabeled or deteriorating containers
  • Transfer or refueling occurring near storm drains
  • No SPCC plan in place
  • No employee training for spill response

Best Practices for Safe Chemical Storage Near Water

To avoid liability and reduce environmental risk, implement the following precautions:

✅ Use Secondary Containment

Ensure tanks, drums, and containers are stored in curbed, bermed, or lined containment areas. These should be capable of holding 110% of the largest container’s volume, plus rainfall if outdoors.

✅ Label and Secure All Containers

All chemical containers should be clearly labeled, tightly sealed, and placed on stable surfaces away from traffic or mechanical damage. Use tamper-proof systems or locking enclosures where possible.

✅ Maintain Distance from Water

Keep storage areas and transfer stations at a safe distance from inlets, drains, ditches, or shorelines. If fueling must occur near water, use closed-loop systems and drip containment pads.

✅ Implement and Maintain an SPCC Plan

If your facility stores 1,320 gallons or more of oil or oil products above ground, you’re likely subject to EPA’s SPCC Rule. Develop a plan, have it certified by a professional, and train employees on how to implement it during an emergency.

✅ Train Your Team

Employees who handle hazardous materials should be trained in:

  • Proper storage practices
  • Daily and monthly inspection procedures
  • Spill prevention and cleanup
  • Emergency notification protocols

✅ Conduct Routine Inspections

Check for signs of corrosion, leakage, or damaged containment. Inspect stormwater drains and channels for signs of discharge.

Final Thoughts

The goal is simple: keep chemicals out of the water. It sounds obvious, but doing it right takes planning, consistency, and accountability.

By following best practices and adhering to environmental regulations, you protect your people, your community, and your bottom line.

If you’re unsure whether your current setup meets regulatory expectations or would like help developing an SPCC plan, let’s connect. As a Certified Safety Professional, I’m here to help ensure your site is both compliant and protected.