Fueling equipment with diesel may seem routine, but it comes with very real risks if proper precautions aren’t taken. One of the most overlooked, yet essential, safety measures during diesel refueling is bonding and grounding.
While diesel is less volatile than gasoline, it still presents flammable vapor risks, especially during transfer operations. Static electricity can accumulate and discharge, potentially igniting vapors if proper precautions aren’t in place.
Let’s walk through what bonding and grounding are, why they matter, and how to do them right.
What Is Bonding and Grounding?
Bonding and grounding are both methods of controlling static electricity during the transfer of flammable liquids like diesel fuel:
- Bonding: Connecting two conductive objects together to equalize their electrical potential. For example, bonding the fuel nozzle to the equipment’s fuel tank ensures no spark will jump between them.
- Grounding: Connecting equipment to the earth to safely dissipate any electrical charge. Grounding prevents static buildup that could discharge unexpectedly.
You often use both methods together during fueling operations.
Why Is This Necessary for Diesel?
Diesel has a higher flash point than gasoline, but it can still generate flammable vapors under certain conditions, especially in hot environments or enclosed spaces. Here’s what makes static buildup during fueling dangerous:
- Static charges can build up from the flow of diesel through hoses and pipes.
- If that charge discharges while flammable vapors are present, it can ignite the vapor-air mixture.
- Even low humidity or dusty conditions can increase the risk of static accumulation.
Bonding and grounding are low-cost, high-impact steps to reduce the risk of a fire.
Best Practices for Bonding and Grounding Diesel Fueling Systems
To ensure safe diesel transfer, follow these general best practices:
✅ Bond before fueling:
- Attach a bonding cable from the fuel nozzle or hose to the equipment’s fuel tank or chassis.
- Ensure the cable has clean, tight contact with bare metal, paint, rust, or dirt can block the connection.
✅ Ground the fueling source:
- Connect the tank or fueling truck to a proper earth ground using a grounding rod or established site grounding system.
- Use ground verification systems where available to confirm that grounding is continuous and effective.
✅ Use proper cables and clamps:
- Only use approved, corrosion-resistant bonding/grounding cables and alligator-style clamps.
- Check cables regularly for fraying, corrosion, or loose connections.
✅ Make it part of the procedure:
- Bonding and grounding should be part of your site’s Standard Operating Procedure (SOP) for all fuel transfers, not just for diesel.
What About Portable Tanks?
Portable fuel tanks (e.g., slip tanks, skid tanks, fuel cubes) used in the field are often not grounded unless procedures are in place. For these, bonding becomes even more critical:
- Bond the hose or nozzle to the equipment or machinery before fueling.
- Consider adding a grounding rod kit for portable tanks, especially if operating in dry or dusty environments.
Regulatory and Reference Guidance
Diesel fuel ‘s flashpoint can vary depending on the type of diesel being used. OSHA and NFPA guidelines recommend bonding and grounding for flammable and combustible liquids that have a flashpoint below 140°F (60°C) during transfer.
- OSHA 29 CFR 1910.106 – Flammable and Combustible Liquids
- NFPA 30 – Flammable and Combustible Liquids Code
- EPA SPCC Guidance – For aboveground fuel storage and transfer safety
Final Thoughts
A spark you can’t see can ignite a fire you can’t stop.
Whether you’re fueling construction equipment, generators, or fleet vehicles, bonding and grounding should be part of your refueling process. It’s a simple, proven way to prevent incidents, keep your site safe, and stay compliant.
If your team needs a fueling safety review or help developing SOPs around diesel fueling, get in touch with Shepherd Safety Consulting. We’re here to help keep your operations safe and compliant.


